Acadia FWD V6-3.6L (2007)
Technical Service Bulletin # 07217A
Date: 070920
Campaign - ECM/TCM Reprogramming for Driveability Issues
Subject:
Customer Satisfaction - Transmission Software and Calibration Update
# 07217A - (09/20/2007)
Models:
2008 Buick Enclave
2007-2008 GMC Acadia
2007-2008 Saturn Outlook
THIS BULLETIN IS BEING REVISED TO ADD 2007 GMC ACADIA AND SATURN OUTLOOK MODELS AND TO CORRECT THE LABOR
TIME. PLEASE DISCARD ALL COPIES OF BULLETIN 07217, ISSUED AUGUST 2007.
Condition
Certain 2007-2008 model year GMC Acadia; Saturn Outlook and 2008 model year Buick Enclave model vehicles may have customer complaints about
drivability, particularly hesitation and shift busyness.
Correction
Dealers/Retailers are to reprogram the engine and transmission control modules.
Vehicles Involved
Involved are certain 2007-2008 GMC Acadia; Saturn Outlook and 2008 Buick Enclave model vehicles built within the VIN breakpoints shown.
IMPORTANT:
Dealers/retailers are to confirm vehicle eligibility prior to beginning repairs by using the system(s) below. Not all vehicles within the above
breakpoints may be involved.
For dealers/retailers with involved vehicles, a listing with involved vehicles containing the complete vehicle identification number, customer name, and
address information has been prepared and will be provided through the applicable system listed below. Dealers/retailers will not have a report available
if they have no involved vehicles currently assigned.
-- US GM - GM DealerWorld Recall Information
-- Canadian GM/Saturn dealers/retailers - GMinfoNet Recall Reports
-- US Saturn retailers - Facility VIN List (included with bulletin in GM DealerWorld)
-- Export dealers - sent directly to dealers
The listing may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration
data for any purpose other than follow-up necessary to complete this program is a violation of law in several states/provinces/countries. Accordingly, you
are urged to limit the use of this report to the follow-up necessary to complete this program.
Parts Information
Do not attempt to order the calibration number from GMSPO. The calibration numbers required for this service procedure are programmed into control
modules via a Techline Tech 2(R) scan tool and TIS2WEB website with the following calibration updates:
^
2007 GMC Acadia and Saturn Outlook: Use data version 9.5 for 2007 or later, available on TIS2 Web 09/16/07; and on TIS DVD version 10.0/2007
or later, mailed to dealers beginning 10/10/07.
