Acadia FWD V6-3.6L (2007)
screw.
7. Loosen the shift control knob screw (1) approximately 4-5 turns. It is not necessary to fully remove the screw from the shift control knob.
Important: Carefully guide the transmission tap up/tap down switch electrical harness and connector past the shift control indicator
while removing the shift control knob.
8. Remove the shift control knob (1) from the shift control lever.
Installation Procedure
Important: Carefully guide the transmission tap up/tap down switch electrical harness and connector past the shift control indicator
while installing the shift control knob.
1. Install the shift control knob (1) to the shift control lever.
