Acadia FWD V6-3.6L (2007)
15.
Loosely attach the motor crank arm to the motor.
Important:
Ensure that the link and motor crank arm are straight. Use the edges of the link and crank arm to confirm if both parts line up straight.
16.
Align both the motor crank arm and the link with the open socket so that both parts are in a straight line.
17.
Hold the motor crank arm with a wrench or channel lock to prevent the motor shaft from turning while tightening the nut. Ensure that the new
flange nut with epoxy (included in the kit) is used.
18.
Tighten the motor crank arm nut to 25 Nm-26 Nm (18.4 lb ft - 19.2 lb ft).
