Acadia FWD V6-3.6L (2007)
Contents of Service Kit
Replacement Kit P/N 20785184: Link is assembled with the motor crank arm.
Tools Required
^
J 39232 Wiper Linkage Separator or Flat-Blade Screwdriver
^
J 39529 Wiper Linkage Installer or Channel Lock Pliers
^
J 39822 Wiper Arm Puller or battery Puller
1.
Remove the wiper arms. Refer to Windshield Wiper Arm Replacement in SI.
2.
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in SI.
Notice:
Before removing the wiper system module from the vehicle, make sure that the module was parked. All the operations on the wiper system
module must be done on a clean environment, free from metal particles or any kind of dirt to avoid contamination of the grease in the plastic
sockets.
3.
Remove the windshield wiper motor/transmission assembly from the plenum panel of the vehicle. Refer to Windshield Wiper Motor and
Windshield Wiper Transmission Replacement in SI.
4.
Place the windshield wiper transmission assembly on a work bench.
