Acadia FWD V6-3.6L (2007)
17.
Hold the motor crank arm with a wrench or channel lock to prevent the motor shaft from turning while tightening the nut. Ensure that the new
flange nut with epoxy (included in the kit) is used.
18.
Tighten the motor crank arm nut to 25 Nm-26 Nm (18.4 lb ft - 19.2 lb ft).
19.
After tightening the nut to the shaft, check and confirm if the original markings to the shaft and bracket still line-up.
20.
Using J 39529 or an equivalent tool, attach the second transmission arm (closed socket type) to the motor crank arm.
