Acadia FWD V6-3.6L (2007)
21.
After this assembly procedure, the motor crank arm and the links should be aligned.
22.
After completion of assembling the wiper module, bring the wiper module to the vehicle and run the wiper system for a few cycles. After cycling,
bring the wiper module to park.
23.
Install the wiper motor/transmission assembly into the vehicle. Refer to Windshield Wiper Transmission Replacement in SI.
24.
Install the windshield wiper arms and blades. Refer to Windshield Wiper Arm Replacement in SI.
25.
Cycle the wiper system to verify the park position. The correct parking position can be verified by checking that the wiper arms move initially in
the up-wipe direction. If the movement starts in the down-wipe direction and then changes to the up-down direction, the wiper linkage assembly
may be installed incorrectly.
