C 1500 1/2 Ton Pickup 2WD V8-305 5.0L VIN F 4-bbl (1983)
Input Shaft: All Technical Service Bulletins
A/T - THM 700-R4 New Input Housing and Shaft Assembly
Number:
84-117
Section:
7A (VIIc)
Date:
April, 1984
Subject:
NEW INPUT HOUSING AND
SHAFT ASSEMBLY
Model and Year: ALL THM 700-R4 TRANSMISSIONS
TO:
ALL CHEVROLET DEALERS
Beginning January 11, 1984 (Julian Date 011), all THM 700-R4 transmissions were built with a new input housing and shaft assembly.
FIGURE 1 - FORMER INPUT HOUSING & SHAFT ASSEMBLY
The past input housing and shaft assembly had a check ball seat drilled into the housing.. A check ball was installed into this hole and
the opening was staked to retain the check ball (see Figure 1).
FIGURE 2 - NEW INPUT HOUSING & SHAFT ASSEMBLY
The new input housing and shaft assembly has a check valve retainer and ball assembly which is pressed into the housing (see Figure
2).
SERVICE INFORMATION