C 1500 1/2 Ton Pickup 2WD V8-305 5.0L VIN F 4-bbl (1983)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Mounting
REMOVAL
1.
Disconnect battery negative ground cable at the battery terminal.
2.
Disconnect clutch push rod at the cross shaft under the vehicle.
3.
Remove steering column covers. Remove screws retaining push rod boots to bulkhead.
4.
Remove air conditioning duct from lower left side of instrument cluster if so equipped.
5.
Disconnect clutch neutral start switch from pedal arm.
6.
Remove bolts attaching lower section of clutch pedal arm to the upper arm.
7.
Remove lower arm and push rod from vehicle.
8.
Remove pedal return spring.
9.
Remove pedal pivot shaft or rod through the support to hold the brake pedal components in place.
10.
Remove the clutch pedal assembly from the support assembly.
