C 1500 Suburban 2WD V8-5.7L VIN R (1996)
Apply sealant GM P/N 1052080 or equivalent to the front cover to block joint and to the rear crankshaft seal to block joint. Apply the sealant for about
25 mm (1 inch) in both directions from each of the four corners.
1. Oil pan gasket to the oil pan.
2. Oil pan to the engine.
3. Oil pan bolts, nuts, and strut rods, (If equipped).
-
Tighten oil pan bolts and nuts to 25 Nm (18 lb. ft.).
4. Oil filter adapter to the oil cooler lines.
5. Oil filter.
6. Transmission oil cooler line retainer to the bracket, (automatic transmission only).
7. Flywheel/torque convector inspection cover.
8. Exhaust crossover pipe.
9. Lower the vehicle.
10. Oil level indicator.
11. Negative battery cable.
-
Fill with the proper quantity and grade of engine oil.
