gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Borg Warner|Page 8097 > < Borg Warner|Page 8095
Page 2
background image

Fig. 2 Exploded View Of Dana Front & Rear Drive Axle w/9 3/4 Inch Ring Gear.

1. Remove axle shafts. Refer to Axle Shaft, Conventional Fixed/Floating / Service and Repair.  See: Drive Axles, Bearings and Joints/Axle Shaft

Assembly/Service and Repair

2. Remove plug and drain lubricant from carrier.
3. Remove carrier cover attaching screws, then the cover and gasket, Figs. 1 and 2.
4. Mark one side of carrier and matching bearing cap for assembly reference, then remove the bearing caps.

Borg Warner|Page 8097 > < Borg Warner|Page 8095