gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < ECM/PCM - Installation Procedures/Mem-Cal Concerns
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
M/T - Idle Rise Between Shifts

GMC NUMBER:

90-6E-93

GROUP:

6E-ENGINE EMISSIONS

DATE:

SEPTEMBER, 1990

CORPORATE
NUMBER:

036512

SUBJECT:

IDLE RISE BETWEEN SHIFTS (NEW CALIBRATION PROM)

MODELS:

1989-90 4.3L C/K TRUCKS WITH MANUAL TRANSMISSION (5LM60, HM117) AND GVW LESS THAN 8500#

CONDITION:
Some owners of the above trucks equipped with  manual transmissions may comment about a slight rise in engine idle speed when depressing the clutch
to shift gears.

CORRECTION:
To correct this condition a new service calibration PROM should be installed. The new calibration

SERVICE PARTS INFORMATION

APPLICATIONS: These PROMs will only function in service ECM (Electronic Control Module), P/N 1227747.

APPLICATIONS: These PROMs will only function in service ECM (Electronic Control Module), P/N 16144288.
Parts are currently available through GMSPO.

increases the rate at which Idle Air Control (IAC) counts are removed following a rapid closing of the throttle. To determine correct service PROM
usage, verify the part number of the ECM currently installed in the vehicle, and follow the appropriate chart.

WARRANTY INFORMATION

Labor Operation:

T0500

Labor Time:

.6 Hrs

NOTE:

Labor Operation is coded to base vehicle coverage in the warranty system.

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < ECM/PCM - Installation Procedures/Mem-Cal Concerns