C 1500 Truck 2WD V6-262 4.3L VIN Z (1992)
-
Insert J 37828 into the snap ring groove.
Removing The Rotor Pulley
-
Insert J 37827 over the exposed shaft.
-
Align the thumb head bolts of J 8433 to the puller fingers and tighten.
Removing The Rotor Pulley (2 Of 2)
-
Turn the puller center Dolt to the right with a socket wrench until the rotor pulley is free.
7. Field coil (10).
-
Loosen the coil lead wire from the clip on top of the compressor front housing.
Removing The Coil Snap Ring
-
Remove the snap ring (7).
-
Remove the coil.
Install or Connect