gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Torque Converter - Squeaks|Page 4655 > < A/T - Loss of Drive Gears in All Ranges|Page 4650
Page 1
background image

Torque Converter: Customer Interest
Torque Converter - Squeaks

BULLETIN NUMBER: 93-7A-49
SECTION: 7A
NUMBER: 8
CORPORATE REFERENCE NUMBER: 377111
DATE: March 1993

SUBJECT:
TORQUE CONVERTER SQUEAKS (NEW CONVERTER ASSEMBLY)

MODELS:
1991-93 C/K, R/V, G, AND P VEHICLES
w/4L80-E/4L80-EHD TRANSMISSION

CONDITION 
Some 1991-93 C/K, R/V, G, and P Vehicles with 4L80-E/4L80-EHD Transmissions may exhibit a torque converter squeak noise. The noise is noticeable
at idle in park, neutral and park/neutral at engine shut-off or during coastdown, with a light load. The noise goes away when the vehicle is in drive or
reverse at idle with the brakes applied.

CAUSE 
High spring load in the stator assembly of torque converter.

CORRECTION 
New converter assembly with a lower spring load in the stator assembly will significantly reduce any noise.

DATE OF PRODUCTION (Figure 1)

Starting January 11, 1993 (Julian Date 011) all 1993 C/K, G, and P Vehicles with 4L80-E/4L80-EHD models will have the new converter assembly.

Torque Converter - Squeaks|Page 4655 > < A/T - Loss of Drive Gears in All Ranges|Page 4650