C 1500 Truck 2WD V6-262 4.3L VIN Z (1992)
Fig. 6 Check Ball Location
Installation
1.
Install the eight check balls in proper location in passages, Fig. 6.
2.
Install gasket spacer plate to case.
3.
Install complete valve body assembly onto case using guide pin set J-25025-B.
4.
Install pressure manifold onto valve body assembly with spring and roller assembly in place.
5.
Install wiring clip, then fluid indicator stop.
6.
Install control valve body assembly retaining bolts.
7.
Connect wiring harness to connectors. Install large end into case first.
8.
Install lube pipe long end into case.
9.
Install lube pipe clip with short bolt and tighten to specifications.
10.
Tighten valve body bolts specifications.
11.
Install filter, then pan and replenish fluid.
