C 1500 Truck 2WD V6-262 4.3L VIN Z (1992)
SERVICE PROCEDURE (FIGURE 1)
1.
Set parking brake.
2.
Remove clutch master cylinder retaining nuts.
3.
Remove clutch master cylinder from front of dash and move aside.
4.
Pry clutch push rod retainer from stud on side of clutch pedal.
5.
Remove clutch push rod from vehicle through front of dash.
6.
Install new, shorter clutch push rod by reversing above procedure.
7.
Torque clutch master cylinder mounting nuts to 15 N-m (11 lbs.ft).
SERVICE PARTS INFORMATION
P/N
Description
Qty
15974712
Rod Assembly
1
Parts are expected to be available from GMSPO on 5/10/93.
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
Labor
Op
Description
Labor Time
K0080
Push Rod and/or Seal,
See Applicable
Clutch Pedal - Replace
Labor Time
Guide
