gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Headlining Trim Panel Replacement (Pickup)|Page 15508 > < Headlining Trim Panel Replacement (Pickup)|Page 15506
Page 2
background image

7. Disconnect the headliner wire connectors from the junction block located next to the brake pedal.
8. Remove the wire harness retainers along the windshield pillar.
9. Follow the routing of the wire harness through the IP and release any wire harness retainers.

10. Carefully pull out the wire harness from the windshield pillar ensuring that the wire harness does not get caught on any part.
11. Remove the center trim pillar moldings.
12. Remove the third pillar trim pillar moldings.
13. Remove the rear corner trim pillar moldings.
14. Disconnect the electrical connector to the rear view mirror.
15. Remove the upper console.
16. Remove the front sunshades.
17. Remove the sunshade holders.
18. Remove the rear coat hook, if equipped.
19. Remove the assist handles.
20. Remove auxiliary climate control console assembly.
21. Remove the roof mounted air outlet louver by turning counter clockwise in order to remove the retainer.
22. Remove the retainer.
23. Remove the sunroof finishing lace, if equipped.
24. Remove the rear headliner retainers, if needed.
25. Carefully separate the air duct at the right C-pillar from the headliner.
26. Carefully separate the headliner from the roof Velcro(R) retainers.

27. With the aid of an assistant carefully slide the headliner out through the rear of the vehicle.
28. Remove the interior dome lamp assembly in order to transfer to the new headliner.

Installation Procedure

1. Install the interior dome lamp assembly to the new headliner.

Headlining Trim Panel Replacement (Pickup)|Page 15508 > < Headlining Trim Panel Replacement (Pickup)|Page 15506