C 1500 Truck 2WD V6-4.3L VIN W (2001)
6. Firmly grasp the reservoir. Pull the reservoir upward in order to disengage the reservoir from the master cylinder.
Installation Procedure
1. Install the master cylinder reservoir to the master cylinder by pushing the reservoir into the master cylinder bores. Apply pressure until the master
cylinder reservoir snaps into place.
2. Using a hammer and a drift punch install new roll pins to the master cylinder.
3. Remove the master cylinder from the bench vice.
4. Install the master cylinder.
5. Release the parking brake.
6. Bleed the brakes.
Master Cylinder Reservoir Filling