C 1500 Truck 2WD V6-4.3L VIN W (2001)
Notice: Refer to Engine Lifting Notice in Service Precautions.
4. Using a jack on the square tab (left side shown) at the rear of the engine block, raise the engine.
5. In order to access the square tab on the right side of the engine, remove the starter.
6. Remove the bolts holding the engine mount to the engine mount bracket and the engine.
7. Remove the engine mount.
8. Remove the engine mount bracket to the engine, if necessary.
9. In order to replace the engine mount frame bracket, remove the two through-bolts.
10. Remove the engine mount frame bracket.
Installation Procedure
