C 1500 Truck 2WD V6-4.3L VIN W (2001)
Idler Pulley: Service and Repair
without Air Conditioning
Drive Belt Idler Pulley Replacement without Air Conditioning
Removal Procedure
1. Remove the drive belt.
2. Remove the belt idler pulley bolt.
3. Remove the belt idler pulley from the power steering pump mounting bracket.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install,the belt idler pulley and the bolt to the. power steering pump mounting bracket.
^
Tighten the bolt to 50 Nm (37 ft. lbs.).
2. Install the drive bolt.