C 1500 Truck 2WD V6-4.3L VIN W (2001)
13. Disconnect the secondary air injection (AIR) crossover pipe from the AIR pipe assemblies, if equipped.
14. Remove the AIR crossover pipe, if equipped.
15. Disconnect the following electrical connectors:
^
The EVAP canister purge solenoid valve (1)
^
The Manifold Absolute Pressure (MAP) sensor(2)
^
The Ignition Control Module (ICM) (4)
^
The ignition coil (3)
16. Disconnect the following electrical connectors:
^
The A/C pressure switch (4), if equipped
^
The A/C compressor clutch (1), if equipped
^
The Exhaust Gas Recirculation (EGR) valve (2)
^
The generator battery positive cable (3)
