C 1500 Truck 2WD V6-4.3L VIN W (2001)
17. Disconnect the following electrical connectors:
^
The fuel meter body assembly (3)
^
The Throttle Position (TP) sensor (1)
^
The Idle Air Control (IAC) motor (2)
^
The Engine Coolant Temperature (ECT) sensor(4)
18. Remove the nut holding the engine wiring harness bracket to the EVAP purge solenoid valve stud.
19. Remove the nut holding the ground wire to the engine wiring harness bracket stud at the rear of the right cylinder head.
20. Remove the stud holding the engine wiring harness bracket.
21. Remove the two nuts holding the engine wiring harness bracket to the upper intake manifold studs.
22. Remove the engine wiring harness bracket from the studs.
23. Move the engine wiring harness with the brackets aside.
