C 1500 Truck 2WD V6-4.3L VIN W (2001)
1. Install the coil assembly to the compressor.
2. Install the coil snap ring.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the coil connector retaining bracket screw.
Tighten
Tighten the screw to 9 N.m (80 lb in).
4. Install the clutch hub/bearing assembly.
5. Install the clutch hub/bearing snap ring.
6. Install the clutch plate assembly.
7. Install the clutch plate retaining bolt (1).
Tighten
Tighten the bolt to 18 N.m (13 lb ft).