C 1500 Truck 2WD V6-4.3L VIN W (2001)
2. Install the radiator inlet hose to the radiator.
3. Install the radiator inlet hose to the support.
4. Align the hinge clip with the lip on the throttle body.
Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and resonator downward until. the mounting stud is through
the hole in the air inlet tube.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the resonator retaining wing nut.
^
Tighten the resonator wing nut to 3 Nm (27 inch lbs.).
6. Connect the PCV hose to the air cleaner outlet duct.
