C 1500 Truck 2WD V6-4.3L VIN W (2001)
Fuel Line Coupler: Service and Repair
Quick Connect Fitting(S) Service (Metal Collar)
TOOLS REQUIRED
J 37088-A Fuel Line Quick-Connect Separator
REMOVAL PROCEDURE
1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to Fuel Pressure Relief Procedure.
2. Remove the retainer from the quick-connect fitting.
CAUTION: Wear safety glasses when using compressed air in order to prevent eye injury.
3. Blow dirt out of the fitting using compressed air.
4. Choose the correct tool from J 37088-A tool set for the size of the fitting. Insert the tool into the female connector, then push inward to release the
locking tabs.
