C 1500 Truck 2WD V6-4.3L VIN W (2001)
1. Apply sealant GM P/N 12346004 or equivalent to the threads of the fitting and/or the engine oil pressure sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the engine oil pressure sensor fitting, if removed.
Tighten
Tighten the engine oil pressure sensor fitting to 15 N.m (11 lb ft).
3. Install the engine oil pressure sensor.
Tighten
Using the J 41712, tighten the engine oil pressure sensor to 30 N.m (22 lb ft).
4. Connect the engine oil pressure sensor electrical connector.
5. Install the distributor. Refer to Distributor Replacement in Ignition System.
6. Check and adjust engine oil level.
