C 1500 Truck 2WD V8-350 5.7L (1989)
5. Brake line support (86) to upper control arm (42).
6. Wheel and tire assembly.
7. Repeat above procedure on opposite side of vehicle.
MAINTENANCE-FREE BALL JOINT REPLACEMENT, UPPER & LOWER:
1988-90 K TRUCK
Required Tools:
J 36607 Ball Joint Separator
J 24319-01 Steering Linkage Puller
Raise vehicle and support it with safety jack stands.
Support lower control arm with a jack.
CAUTION: Jack or stand must remain under the lower control arm spring seat during removal and installation to retain the torsion bar and control arm
in position.
Figure 10 - Hub. Knuckle and the Ball Joints
Remove (figure 10)
1.
Wheel and tire assembly.
2.
Brake caliper and rotor.