gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 5480 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 5478
Page 5
background image

NOTE:

It is imperative that the air valve assembly is not damaged and that it is reinstalled correctly. Failure to do so could result in cold air
and/or exhaust fume entry into the cab.

7.

Reinstall lower door trim panel.

The time required to perform the above service procedure on two doors is 0.4 hours.

Technical Service Bulletin # 86T221

Date: 870201

Door Trim Panel - Warp

CHEVROLET NUMBER: 86-T-221

SECTION:

10 - Body Section

DATE: February, 1987
SUBJECT:

DOOR TRIM PANEL WARP

MODELS:

1985-86 C/K MODELS

Figure No. 1 - Trim Panel Warpage Location

Door trim panel warpage has been reported on some 1985-86 C/K models just above the carpet at the lower edge of the door trim panel (See Figure
No.1).

Figure No. 2 - Door Trim Panel Seal

To repair this condition, a new seal (P/N 363139) has been released. This seal should be installed as shown in Figure No.2
Beginning with the following VIN breakpoints, this new seal was incorporated in production.

Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 5480 > < Engine, A/T - Shift/Driveability Concerns/MIL ON|Page 5478