gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Door (Front) - High Closing Effort|Page 12802 > < Door (Front) - High Closing Effort
Page 2
background image

6.

Install the weatherstrip to the door opening using the following procedure:

6.1.

Position the end of the new weatherstrip in the same location as the weatherstrip you are replacing.

6.2.

Push the weatherstrip onto the pinchweld flange. Start at the end and work around the entire edge of the door opening.

7.

Install the rear quarter trim panel. Refer to the Interior Trim subsection of the Service Manual.

8.

Install the rear seat assembly (extended cab vehicles only). Refer to the Seats subsection of the Service Manual.

9.

Install the hinge pillar trim panel. Refer to the Interior Trim subsection of the Service Manual.

10.

Install the door sill plate.

Rear Side Door Weatherstrip Replacement (Extended Cab Only)

1.

Remove the third door trim panel assembly. Refer to the Interior Trim subsection of the Service Manual.

2.

Remove the weatherstrip from the door edge.

3.

Install the weatherstrip to the door edge

4.

Install the third door trim panel assembly. Refer to the Interior Trim subsection of the Service Manual.

Parts Information

Warranty Information

Door (Front) - High Closing Effort|Page 12802 > < Door (Front) - High Closing Effort