C 1500 Truck 2WD V8-5.3L VIN T (1999)
2. Install the brake pedal bolt.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the brake pedal bolt nut.
-
Tighten the bolt to 47 Nm (35 ft. lbs.).
4. Install the pushrod (3) to the brake pedal stud (1).
5. Install the stoplamp switch (2).
6. Install the pushrod retaining clip (4).
7. Connect electrical connection to the stop lamp switch.
8. Enable the SIR.
9. Connect the negative battery cable.
-
Tighten the bolt to 17 Nm (13 ft. lbs.).
