gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Brake Rotor/Disc: > < Brake Pads Replacement - Front|Page 9007
Page 1
background image

Brake Rotor/Disc: Customer Interest
Brakes - Rear Brake Clunk Noise or Vibration/Pulsation

File In Section: 5 - Brakes

Bulletin No.: 86-50-22

Date: October, 1998

Subject:
Rear Brake Clunk Noise or Vibration/Pulsation (Install New Rear Brake Rotors)

Models:
1999 Chevrolet Silverado and GMC Sierra 15 Series Models with RPO JC5

Condition

Some owners may comment about a "clunk" or "thump" noise coming from the rear of the vehicle, or a vibration/pulsation of the vehicle when the
brakes are applied. The "clunk" or "thump" noise may be one per revolution of the wheel. The vibration or pulsation may or may not be felt at the brake
pedal.

Cause

Condition may be caused by the brake rotors micro finish or disc thickness not to specification.

Correction

Replace the rear brake rotors on both sides (left and right) with new rotors that are within specification. Use the part number listed below. Refer to the
1999 Silverado and Sierra Service Information for rotor replacement procedures.

Parts Information

P/N

Description

Qty

15712800*

Rotor Assembly

2

Parts are currently available from GMSPO.

*ATTENTION DEALERS:

PLEASE REFERENCE GM SERVICE PARTS OPERATION (GMSPO) INFORMATION BULLETIN # 98-307 DATED OCTOBER 20, 1998 FOR
SPO SPECIAL RETURN PROCEDURE.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

H0137

Rotor Assembly

Use published

R&R or Replace

labor operation
time

All Technical Service Bulletins for Brake Rotor/Disc: > < Brake Pads Replacement - Front|Page 9007