C 1500 Truck 2WD V8-5.3L VIN T (1999)
IMPORTANT: Align the tapered legs of the tool with the machined alignment surfaces on the front cover.
4. Align the J 41476
NOTICE: Refer to Fastener Notice
5. Install the crankshaft balancer bolt.
5.1.
Tighten the crankshaft balancer bolt by hand until snug. Do not overtighten.
5.2.
Snug the oil pan-to-cover bolts in order to position the cover at the pan rail.
5.3.
Tighten the oil pan-to-front cover bolts to 25 Nm (18 ft. lbs).
5.4.
Tighten the front cover bolts to 25 Nm (18 ft. lbs).
6. Remove J 41476 from the front cover.
7. Install the front crankshaft oil seal. Refer to Crankshaft Front Cover Oil Seal Installation.
8. Install the crankshaft balancer to the crankshaft. Refer to Crankshaft Balancer Installation.
9. Install the water pump. Refer to Water Pump Replacement in Cooling System.
