C 1500 Truck 2WD V8-5.3L VIN T (1999)
NOTE: Handling and care of the seal protector is important. If the seal protector is nicked or the bottom flared, the new seal may be damaged
during installation.
8. Install the seal using one of the following 2 methods:
9. Method 1
Install the J 34614 in the seal lip.
10. Place the seal lip over the compressor shaft.
11. Push the seal (1) into place using a rotary motion.
12. Method 2
13. Place the J34614 over the end of the compressor shaft.
14. Slide the new seal (1) onto the shaft using a rotary motion until the seal stops.
15. Ensure that the seal contacts the O-ring. Do not dislodge the O-ring. Disengage the installer from the seal.
16. Remove the J23 128-A and the J34614.
