C 1500 Truck 2WD V8-5.3L VIN T (1999)
Transmission Shift Position Indicator Lamp: Service and Repair
REMOVAL PROCEDURE
1. Ensure the headlamp switch is in the OFF position.
2. Unscrew the shift lever knob. Remove the shift lever knob.
3. Remove the 4 bezel screws.
4. Remove the transfer case bezel.
5. Pull the bulbs straight out of the sockets.
INSTALLATION PROCEDURE
1. Push the bulbs straight into the sockets.
2. Install the bulbs and the sockets into the back of the bezel.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the bezel to the floor with the 4 screws.
Tighten
Tighten the screws to 2 N.m (18 lb. in).
4. Install the shift lever knob.