gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Underhood Lamp Switch > < Diagram Information and Instructions|Page 15687
Page 3
background image

14. Install the steering wheel onto the steering shaft. Refer to Steering Wheel Replacement.
15. Install the steering wheel nut.

-

Tighten the steering wheel nut to 40 Nm (29 ft. lbs.).

16. Install the horn switch. Refer to Horn Switch Replacement - On Vehicle.
17. Install the inflator module. Refer to Infl Rst Steering Wheel Module Replacement in Air Bags and Seat Belts.
18. Install the tilt lever. Refer to Tilt Lever Replacement - On Vehicle.
19. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts.
20. Connect the negative battery cable.

Perform the Idle Learn Procedure in Powertrain Management.

Underhood Lamp Switch > < Diagram Information and Instructions|Page 15687