C 1500 Truck 2WD V8-5.3L VIN T (1999)
Fuel Pressure Release: Service and Repair
CAUTION: Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury.
After relieving the system pressure, a small amount of fuel may be released when servicing the fuel lines or connections. In order to reduce the
chance of personal injury, cover the regulator and the fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may
leak out. Place the towel in an approved container when the disconnection is complete.
TOOL REQUIRED
J 34730 - 1A Fuel Pressure Gauge
1. Turn the ignition OFF.
CAUTION: Refer to the Battery Disconnect Caution in Service Precautions.
2. Disconnect the negative battery cable in order to avoid possible fuel discharge if an accidental attempt is made to start the engine.
3. Loosen the fuel filler cap in order to relieve the fuel tank vapor pressure.
4. Connect the J 34730 - 1A fuel pressure gauge to the fuel pressure valve. Wrap a shop towel around the fitting while connecting the gauge in order
to avoid spillage.
5. Install the bleed hose of the gauge into an approved container.
6. Open the valve on the gauge to bleed the system pressure. Fuel connections are now safe for servicing.
7. Drain any fuel remaining in the gauge into an approved container.
