C 1500 Truck 2WD V8-5.3L VIN T (1999)
3. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure.
4. Remove the fuel rail assembly.
5. Remove the injector retainer clip (19).
6. Insert the fork of J 43013 fuel injector assembly removal tool behind the injector connector between the fuel rail pod and the 3 protruding
retaining clip ledges. Use a prying motion while inserting the tool in order to force the injector out of the fuel rail pod.
7. Discard the injector retainer clip (1).
8. Remove the injector O-ring seals (2 and 4) from both ends of the injector. Discard the O-ring seals.
INSTALLATION PROCEDURE
IMPORTANT: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.
