C 1500 Truck 2WD V8-5.3L VIN T (1999)
Notice: Ensure all fasteners are securely seated before applying needed torque. Failure to do so may result in component damage or malfunctioning of
steering column.
1. Install the wave washer.
2. To install the SIR coil assembly, align the block tooth on the race and upper shaft assembly to the 12 o'clock position.
Important:
^
Ensure that the coil assembly is centered.
^
The coil assembly becomes un-centered under the following conditions:
-
The steering column is separated from the steering gear and allowed to rotate.
-
The centering spring is pushed down, letting the hub rotate while the coil is removed from the steering column. In the event this occurs.
3. Install the pre-centered coil assembly to the steering column. Remove the centering tab (1) and discard.
