C 1500 Truck 2WD V8-5.3L VIN T (1999)
Arming Sensor: Service and Repair
Installation Procedure
1. Install the Inflatable Restraint Front End Discriminating Sensor to the front end lower tie surface make sure the arrow is pointing toward the front
of the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices
2. Install the Inflatable Restraint Front End Discriminating Sensor mounting fasteners.
Tighten
Tighten fasteners to 8 N.m (71 lb in).
3. Connect the Inflatable Restraint Front End Discriminating Sensor harness connector to the sensor.
4. Install the Connector Position Assurance (CPA) to the Inflatable Restraint Front End Discriminating Sensor harness connector.
