C 1500 Truck 2WD V8-5.3L VIN T (1999)
Power Window Switch: Service and Repair
Power Window Switch
Removal Procedure
1. Remove the power accessory switch plate.
2. Disconnect the power window switch wiring connector.
3. Remove the screws.
4. Remove the switch from the switch plate by lifting the rear of the switch assembly and sliding the switch out from the accessory switch panel.
Installation Procedure
1. Install the switch to the switch plate sliding the front tabs in first. Rock the switch down in order to seat the switch completely.
2. Install the screws.
3. Connect the wiring connector.
4. Install the power accessory switch plate.
