C 1500 Truck 2WD V8-5.3L VIN T (1999)
Fuse Block: Service and Repair
Fuse Block Replacement (Left Bussed Electrical Center)
REMOVAL PROCEDURE
Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the left side end panel.
3. Press on the clips on the top and the bottom in order to remove the Left Bussed Electrical Center (LBEC) from the Instrument Panel (IP)
assembly.
INSTALLATION PROCEDURE
1. Position the LBEC onto the IP assembly.
2. Press on the clips on the top and the bottom of the LBEC. Push in the clips until the clips seat.
3. Install the left side end panel.
4. Connect the negative battery cable.
