C 1500 Truck 2WD V8-5.3L VIN T (1999)
Power Steering Pump: Service and Repair
REMOVAL PROCEDURE
-
Tools Required
-
J 25033-B Power Steering Pump Pulley Installer
-
J 24319-01 Power Steering Pump Pulley Remover
1. Remove the upper radiator fan shroud.
2. Remove the drive belt.
3. Remove the pulley.
-
Install the J 25034-B.
-
Be sure the pilot bolt bottoms in the pump shaft by turning the nut to the top of the pilot bolt.
-
Hold the nut.
-
Turn the pilot bolt counterclockwise.
4. Place a drain pan under the pump.
5. Remove the hoses from the pump.
6. Remove the bolts from the rear of the pump.
7. Remove the bolts from the front of the pump.
8. Remove the pump from the vehicle.
INSTALLATION PROCEDURE
