C 1500 Truck 2WD V8-5.3L VIN T (1999)
8. Install the pitman shaft boot (2).
9. Install the pitman arm (3) to the steering gear.
10. Install the lock washer (2).
11. Install the nut (3).
Stub Shaft Housing Replacement
DISASSEMBLY PROCEDURE
1. Remove the stub shaft housing bolts (5) from the stub shaft housing (4).
NOTICE: Replace the housing if the stub shaft housing, seal or bearing are damaged.
2. Remove the stub shaft housing (4) from the steering gear.
3. Remove the stub shaft housing O-rings (2) (3) from the steering gear.
4. Remove the retaining ring (1) from the steering gear.
ASSEMBLY PROCEDURE
