C 1500 Truck 2WD V8-5.3L VIN T (1999)
18.
As soon as the sealer skins-over, you can apply an undercoating. Apply a spray-on black, rubberized undercoating to the reinforcement and the
crossmember. Overlap the original coating in order to provide an effective corrosion protection.
19.
Remove the high-pressure PS fluid line from the rear of the PS pump.
20.
Remove the brass PS pump-metering valve.
21.
Install the revised metering valve to the PS pump.
Tighten
Tighten the valve to 33 N.m (24 lb ft).
22.
Install the PS fluid high-pressure line to the pump.
Tighten
Tighten the line fitting to 28 N.m (20 lb ft).
