C 1500 Truck 2WD V8-5.3L VIN T (1999)
Band Apply Servo: Service and Repair
Automatic Transmission - 4L80-E
Reverse Servo Replacement
Removal Procedure
1. Remove the transmission oil pan and filter. Refer to AT Fluid/Filter Changing.
2. Remove the rear servo assembly from the transmission case as follows:
^
Cover bolts (6).
^
Cover (5).
^
Cover gasket (4).
^
Bottom retaining clip (3).
^
Servo piston (2).
^
Outer ring oil seal (1).
^
Inner ring oil seal (7).
^
Accumulator piston (8).
^
Piston seal (9).
^
Washer (10).
^
Servo spring (11).
^
Servo spring retainer (12).
^
Selective pin (13).
^
Accumulator spring (14).
Checking Procedure
^
Tools Required
-
J 21370-10 Gage Pin
-
J 38737 Band Apply Pin Checking Tool
1. Place the J21370 - 10 in the servo bore.