gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Seals and Gaskets, M/T|NV 3500|Page 8460 > < Seals and Gaskets, M/T|NV 3500
Page 2
background image

3. Remove J 36502-2A from the output shaft.

4. Fill the space between the seal lips with grease GM P/N 1052497 or equivalent.
5. Install the rear propeller shaft. Refer to Propeller Shaft Replacement (Front Drive) in Propeller Shaft.
6. Check the transmission oil level. Refer to Fluid Replacement.
7. Lower the vehicle.

Seals and Gaskets, M/T|NV 3500|Page 8460 > < Seals and Gaskets, M/T|NV 3500