gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Hinge Pillar/IP Area - Squeaks/Rattles|Page 16371 > < Body - Windshield Area Wind Noise|Page 16366
Page 1
background image

Windshield: All Technical Service Bulletins
Front Hinge Pillar/IP Area - Squeaks/Rattles

File in Section: 08 - Body and Accessories 

Bulletin No.: 99-08-110-004

Date: May, 1999

TECHNICAL

Subject:
Squeak/Rattle Noise from Front Hinge Pillar/Instrument Panel Area 
(Replace Windshield Side Garnish Molding)

Models:
1999 Chevrolet Silverado and GMC Sierra Models

Condition

Some owners may comment about a squeak or rattle noise near the right or the left hinge pillar/Instrument panel (IP) area. The condition may be more
noticeable when driving over bumps.

Cause

The condition may be caused by a loose fit of the windshield side garnish molding to the hinge pillar, allowing movement of the trim.

Correction

Replace the windshield side garnish molding on affected vehicles. Use the appropriate part numbers listed below. Refer to the Interior Trim subsection In
the 1999 Silverado and Sierra Service Manual for replacement procedures.

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Labor
Operation

Description

Labor Time

Molding Asm.,

Use published

C2000

W/S Side Garnish -

labor

Replace (Right)

operation time

Molding Asm.,

Use published

C2001

W/S Side Garnish -

labor

Front Hinge Pillar/IP Area - Squeaks/Rattles|Page 16371 > < Body - Windshield Area Wind Noise|Page 16366