C 1500 Truck 2WD V8-5.3L VIN T (1999)
12. If you are performing the short method, use a utility knife or the equivalent tool in order to trim the remaining adhesive (2) to a uniform
thickness.
13. If you are performing the extended method, use a utility knife or the equivalent tool in order to remove all of the urethane adhesive from the
pinchweld flange.
14. Clean any loose material from the windshield opening.
15. If you are reusing the windshield, remove the remaining urethane adhesive from the windshield.
16. Clean the sealing surface of the windshield with GM window cleaner PIN 1050427 or equivalent.
INSTALLATION PROCEDURE
1. Dry-fit the windshield into the opening in order to determine the correct position of the windshield.
1.1. Adjust the windshield to the correct position in the opening.
1.2. Apply 4 short strips of masking tape vertically across the top of the windshield-to-body opening.
