C 1500 Truck 2WD V8-6.0L VIN U (2002)
Speaker: Service and Repair
Front Floor Console (Tweeter)
REMOVAL PROCEDURE
1. Remove the center console bezel.
2. Remove the speaker retaining nuts (1).
3. Disconnect the wire connector (2).
4. Remove the speaker from the console.
INSTALLATION PROCEDURE
1. Install the speaker to the console.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Do not exceed torque specification. Over tightening of the nuts will result in the stud breaking from the console.
2. Install the retaining nuts.
Tighten
Tighten the retaining nuts to 0.7 N.m (6.2 lb in).
3. Connect the electrical connector (2).
4. Install the center console bezel.
