gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 13542 > < Procedures|Page 13540
Page 1
background image

Headliner: Removal and Replacement

Headlining Trim Panel Replacement

Removal Procedure

1. Remove the IP top trim panel. Refer to Instrument Panel Upper Trim Panel Replacement   (See: Dashboard / Instrument Panel/Service and

Repair/Instrument Panel (I/P) - Trim Panel Replacement/Trim Panel Replacement - Upper) in Instrument Panel, Gages and Console.

2. Remove the drivers side accessory housing (1) from the IP.

3. Remove the IP upper brackets.
4. Remove the transfer case control module, if equipped. Refer to Transfer Case Shift Control Module Replacement    in Transfer Case.

5. Release the pressure on the headliner wire harness by removing the wire harness retainer (1) from the IP support beam.

Procedures|Page 13542 > < Procedures|Page 13540