C 1500 Truck 2WD V8-6.0L VIN U (2002)
Utility Storage Compartment: Service and Repair
Tool Stowage Compartment Cover Support Replacement
Tool Stowage Compartment Cover Support Replacement
Removal Procedure
1. Open the lid of the tool storage box.
Caution: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
Important: The storage box lid has spring tension. Be sure to secure the lid when removing the support assembly, if the storage box is not
inside the vehicle.
2. Remove the rivets (1) from the upper lid (2).
3. Remove the rivets (3) from the lower box (4).
4. Remove the support assembly from the tool storage box.
Installation Procedure
1. Install the support assembly to the storage box.
2. Install the rivets (3) to the lower box (4).
3. Install the rivets (1) to the upper lid (2).
4. Close the lid on the tool storage box.
